The Truck Unload Alarm Panel is designed to notify the truck operator when a high level is reached during material loading of a storage tank. Upon detection of a high level, an alarm horn is accompanied by a flashing red light.
The Panel is housed in a NEMA 4 enclosure with a rotary selector switch for up to seven different destinations, an alarm silence button, and an on/off switch for the 120 volt AC. The standard truck unload alarm panel also includes provisions to operate the exhaust fan motor and the bin vent bag pulse cleaning circuitry for the selected destination.
The Premier Pneumatics Series 4 MPC Controller controls up to 24 vacuum receivers on one blower with one back-up blower. The Series 4 MPC Controller is designed to be used with both P-Series and 2400 Series Receivers. It can control traditional "keep full" receivers that fill and dump until a vessel below is full and/or Premier's line of "refill" receivers that fill and hold material until a dump request is received. A low-voltage cable system with quick-connect plugs allows the receivers to be connected to the central controller without tools. In addition, low-voltage wiring generally does not require an electrician, allowing for a less expensive electrical installation.
The controller consists of a microprocessor central ...
(2) The Series 4 PLC Central Controller controls up to 24 vacuum receivers and 2 blowers. The Series 4 PLC Controller is designed to be used with both P-Series and 2400 Series Receivers. It can control traditional "keep full" receivers that fill and dump until a vessel below is full and/or Premier's line of "refill" receivers that fill and hold material until a dump request is received. A low-voltage cable system with quick-connect plugs allows the receivers to be connected to the central controller without tools. In addition, low-voltage wiring generally does not require an electrician or conduit, allowing for a less expensive electrical installation.
The Series 4 PLC controller features a user-friendly touchscreen for system status ...
The LSR (Loader, Single Receiver) Controller consolidates several applications into one system, allowing the LSR to control a K-Tron Premier vacuum conveyor for pneumatically conveying a wide variety of bulk materials. The LSR operates with either a selfcontained loader or single central receiver with separate blower. This economical controller provides precise, reliable control for a variety of applications - filling by time or level - and various discharge configurations, including gravity or powered gate.
The controller is locally mounted with all 24 VDC sensors and actuators pre-wired. An auto-switching power supply accepts either 115 or 230 VAC. The front panel of the controller includes an on/off switch, a potentiometer to ...
(4) One (1) Add-On Kit is required for each receiver in a Series 2400 system using trunk drop connection. It includes electrical accessories to connect a receiver to a Series 2400 system. The distance from the Central Controller to the farthest receiver cannot exceed 244 meters (800 feet).
For PLC-Daisy Chain option, Add-on kits with "T" connectors and drop cables are not required. See Installation Cabling and Accessories.
